FENOTCHMODESEL=FENOTCHFILT, MODE=CONT, ADCATTENMODE=DISABLE
No Description
| PWRTARGET | Power Target |
| MODE | Mode 0 (CONT): AGC loop is adjusting gain continuously. 1 (LOCKPREDET): Gain is locked once a preamble is detected. 2 (LOCKFRAMEDET): Gain is locked once a sync word is detected. 3 (LOCKDSA): Gain is locked once DSA is detected. |
| RSSISHIFT | RSSI Shift |
| DISCFLOOPADJ | Disable gain adjustment by CFLOOP |
| CFLOOPNFADJ | Enable NF correction term in SL |
| CFLOOPNEWCALC | Enable new wanted gain calculation in SL |
| DISRESETCHPWR | Disable Reset of CHPWR |
| ADCATTENMODE | ADC Attenuator mode 0 (DISABLE): ADC attenuator back-off will not be done by AGC 1 (NOTMAXGAIN): ADC attenuator is backed-off if rxgain is NOT MAXGAIN |
| FENOTCHMODESEL | FE notch mode select 0 (FENOTCHFILT): FE notch configured as a filter 1 (FENOTCHATTN): FE notch configured as a atenueator |
| ADCATTENCODE | ADC Attenuator code |
| ENRSSIRESET | Enables reset of RSSI and CCA |
| DSADISCFLOOP | Disable channel filter loop |
| DISPNGAINUP | Disable PN gain increase |
| DISPNDWNCOMP | Disable PN gain decrease compensation |
| AGCRST | AGC reset |